125000858 - 0510C20 LUBRICATION SYSTEM - CHECK DELIVERY PRESSURE

• Let the engine warm up (oil temperature ~ 90°C).
•     Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD ON BULKHEAD - R+R
•     Op. 1080B40 CATALYTIC PRE-CONVERTER - R R
•     Op. 1084A42 ENGINE OIL TEMPERATURE SENDER UNIT - R + R

1. Fit the insufficient engine oil pressure warning light switch in the housing.

	Description	Code
1	Connector	1.860.969.000

2. Fit the pressure gauge

•     Op. 1080B40 CATALYTIC PRE-CONVERTER - R R
• Start up the engine only for long enough to check that the engine oil pressure is within the recommended values.

•     Op. 1080B40 CATALYTIC PRE-CONVERTER - R R
• Remove the pressure gauge.
• Remove the tool.

	Description	Code
-	Connector	1.860.969.000

•     Op. 1084A42 ENGINE OIL TEMPERATURE SENDER UNIT - R + R
•     Op. 1080B40 CATALYTIC PRE-CONVERTER - R R
•     Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD ON BULKHEAD - R+R