1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE - Alfa - GT - eLearn

125000880 - 1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE

) Position the vehicle on a lift.Proceed with the removal Op. 4450B04 RUOTA ANTERIORE DESTRA - S.R. Op. 7055B66 PROTEZIONE PARAPOLVERE VANO MOTORE NEL PASSARUOTA ANTERIORE DESTRO - S.R.Proceed with the removal Op. 7055B91 PASSARUOTA SUPPLEMENTARE ANTERIORE DESTRO - S.R.Position a hydraulic jack beneath the engine.1. Loosen the bolt fixing the timing side rigid engine support to the flexible mounting.Lower the hydraulic jack, as necessary.2. Undo the bolts (2a) and remove the power unit front support flexible mounting (2b).

Refitting ( Removing

) 1. Place the power unit front support flexible mounting (1a) in its housing and secure it to the crossmember tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M8	(Bodyshell side) 3.2 - 3.9

Using the hydraulic jack, place the timing side side rigid support in contact with the flexible mounting.2. Tighten the bolt securing the timing side rigid engine support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	RIGID ENGINE MOUNT, TIMING SIDE	M12	(Flexible mounting side) 7.9 - 9.7

Remove the hydraulic jack from beneath the engine. Op. 7055B91 PASSARUOTA SUPPLEMENTARE ANTERIORE DESTRO - S.R.Proceed with the refitting Op. 7055B66 PROTEZIONE PARAPOLVERE VANO MOTORE NEL PASSARUOTA ANTERIORE DESTRO - S.R.Proceed with the refitting Op. 4450B04 RUOTA ANTERIORE DESTRA - S.R.Remove the vehicle from the lift.