1008C16 BODY LINK BRACKET - R R - Alfa - GT - eLearn

125000886 - 1008C16 BODY LINK BRACKET - R R

) Proceed with the removal Op. 1008C10 POWER UNIT UPPER REACTION LINK R R.1. Undo the nuts (1a) and remove the upper bracket on the bodyshell for the reaction rod (1b).

The above mentioned nuts also secure the right front shock absorber to the bodyshell.

2. Undo the nut (2a) fixing the mounting bracket (2b) for the wheel rpm sensor connection and the fuel pipe.3. Undo the nut (3a) and the bolt (3b) and remove the lower bracket on the bodyshell for the reaction rod (3c).

Refitting ( Removing

) 1. Place the lower bracket on the bodyshell for the reaction rod (1a) back in its housing and secure it by tightening the bolt (1b) and the nut (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	REACTION ROD LOWER MOUNTING BRACKET	M8	(Bodyshell side) 2.2 ÷ 2.6

	Fastening	Component	Ø	Value(daNm)
1c	Nut	REACTION ROD LOWER MOUNTING BRACKET	M8	(Bodyshell side) 2.2 ÷ 2.6

2. Place the mounting bracket (2a) for the wheel rpm sensor connection and the fuel pipe back in its housing, then secure it using the nut (2b).3. Place the upper bracket on the bodyshell for the reaction rod (3a) back in its housing and secure it by tightening the nuts (3b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
3b	Nut	REACTION ROD UPPER MOUNTING BRACKET	M8	(Bodyshell side) 2.2 ÷ 2.6

The above mentioned nuts also secure the right front shock absorber to the bodyshell.

Proceed with the refitting Op. 1008C10 POWER UNIT UPPER REACTION LINK R R.