125000926 - 1020D18 FRONT CRANK SHAFT COVER OIL SEAL - REPLACE
Removing
(
Refitting
)
Proceed with the removal Op. 4450B04 RIGHT FRONT WHEEL R RProceed with the removal Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.Proceed with the removal Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with the removal Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..Proceed with the removal Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R.Proceed with the removal Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.Proceed with the removal Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Proceed with the removal 5510C14 ROCCHETTI/BOBINE di accensione - S.R..Proceed with the removal Op. 1016A20 SINGLE CAM COVER - R + R AND REPLACE GASKET.Proceed with the removal Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.Proceed with the removal Op. 1032B46 TOOTHED DRIVE PULLEY - R + R.1. Release and remove the crankshaft front oil seal cover. | Take care not to damage the oil seal seat during its removal. |
Refitting
(
Removing
)
1. Fit a new the crankshaft front cover oil seal (1a) in the housing using the tool (1b).| Description | Code | |
|---|---|---|
| 1b | Fitting tool | 1.821.247.000 |
