125000965 - 1032B46 TOOTHED DRIVE PULLEY - R + R

Removing ( Refitting ) Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

	Description	Connector
-	Battery	A1B

Proceed with the removal    Op. 4450B04 RIGHT FRONT WHEEL R RProceed with the removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.Proceed with the removal    Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with the removal    Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..Proceed with the removal    Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R.Proceed with the removal    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.Proceed with the removal    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Proceed with the removal 5510C14 ROCCHETTI/BOBINE di accensione - S.R..Proceed with the removal    Op. 1016A20 SINGLE CAM COVER - R + R AND REPLACE GASKET.Proceed with the removal    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT. 1. Undo the bolts (1a) and remove the cover (1b).2. Fit the flywheel lock.

	Description	Code
2	Counter-torque	1.860.898.000

1. Undo the bolts (1a) and remove the cover (1b).2. Fit the flywheel lock.

	Description	Code
2	Counter-torque	1.860.898.000

1. Undo the bolt (1a) (left hand thread) and remove the toothed drive pulley (1b). Refitting ( Removing ) Position the toothed timing drive pulley in its housing and secure it tightening the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Left hand bolt	DRIVE PULLEY(PULLIES) TIMING	M16	(Crankshaft side) 20.9 - 23.1

Remove the flywheel lock.

	Description	Code
-	Counter-torque	1.860.898.000

Fit the cover in its housing and secure it using the bolts.Proceed with the refitting    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.Proceed with the refitting    Op. 1016A20 SINGLE CAM COVER - R + R AND REPLACE GASKET.Proceed with the refitting 5510C14 ROCCHETTI/BOBINE di accensione - S.R..Proceed with the refitting    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Proceed with the refitting    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.Proceed with the refitting    Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R.Proceed with the refitting    Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..Proceed with the refitting    Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with the refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.Proceed with the refitting    Op. 4450B04 RIGHT FRONT WHEEL R RConnect the negative battery terminal (-).Remove the vehicle from the lift.