125000975 - 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Removing ( Refitting ) Position the vehicle on a lift.Proceed with the removal    Op. 4450B04 RIGHT FRONT WHEEL R RProceed with the removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.Proceed with the removal    Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with the removal    Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..Proceed with the removal    Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R.1. Undo the lower bolts fixing the timing belt cover. 1. Unscrew bolts (1a), nut (1b) and remove the auxiliary drivebelt protection (1c). 1. Undo the remaining bolt (1a) and remove the protective timing cover (1b). Proceed with the removal    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.1. Undo the bolts (1a) and move the power steering fluid reservoir (1b) without disconnecting the pipes. 1. Undo the fixing bolts (1a) and remove the side protective timing cover (1b). Refitting ( Removing ) Refit the side timing belt covers and secure them using the bolts.Refit the power steering fluid reservoir and secure with bolts.Proceed with the refitting    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Refit the upper timing belt cover and secure it using the upper bolt.Refit the auxiliary drivebelt protection and secure with the bolts and nut.Tighten the lower bolts fixing the timing belt cover.Proceed with the refitting    Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R.Proceed with the refitting    Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..Proceed with the refitting    Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with the refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.Proceed with the refitting    Op. 4450B04 RIGHT FRONT WHEEL R RRemove the vehicle from the lift.