1036C14 CAMSHAFT IN CYLINDER HEAD - R R WITH HEAD REMOVED - Alfa - GT - eLearn

125000979 - 1036C14 CAMSHAFT IN CYLINDER HEAD - R R WITH HEAD REMOVED

) 1. Place the tool in the vice.

	Description	Code
1	Support	1.820.012.000

2. Fit the tool.

	Description	Code
2	Support	1.820.258.000

3. Fit the tool.

	Description	Code
3	Spacer	1.820.267.000

4. Position the cylinder head (4a) on the support tools and fasten it using the nuts (4b).

1. Undo the exhaust side camshaft pulley bolt (1a) using the tools (1b) for counter-torque.

	Description	Code
1b	Counter-torque	1.822.146.000

	Description	Code
1b	Counter-torque	1.822.156.000

2. Remove the exhaust side camshaft drive pulley.3. Undo the inlet side camshaft drive pulley bolts (3a) using the tool (3b) for counter-torque.

	Description	Code
3b	Counter-torque	1.822.155.000

4. Remove the inlet side camshaft drive pulley.5. Undo the bolt fixing the cam angle sensor to the camshaft front cap.

1. Undo the bolts (1a) and remove the camshaft caps (1b).

Place them in order for refitting.

2. Remove the inlet side camshaft front supper upper half-bearing.3. Remove the camshafts.4. Remove the camshaft front oil seals.5. Remove the inlet side camshaft front support lower half-bearing.

Refitting ( Removing

) Fit the inlet side camshaft front support lower half-bearing.Fit the camshafts.Fit the inlet side camshaft front support upper half-bearing.Fit the camshaft caps and secure them tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

1. Fit the exhaust side camshaft front oil seal (1a) using the tool (1b).

	Description	Code
1b	Fitting tool	1.821.228.000

1. Fit the inlet side camshaft front oil seal (1a) using the tool (1b).

	Description	Code
1b	Fitting tool	1.821.252.000

5. Tighten the bolt fixing the cam angle sensor to the camshaft front cap. Remove the cylinder head from the support tools.Remove the cylinder head support tools from the vice and put them down.