125001002 - 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS
Removing
(
Refitting
)
- Position the vehicle on a lift.
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
| Description | Connector | |
|---|---|---|
| - | Battery | See A001 Battery |
- Remove the fuel filler pipe cap.
- Undo the bolts (2a) and disconnect the fuel filler pipe assembly (2b) from the bodyshell.
- Undo the nuts (1a) and remove the plastic protection (1b) for the fuel filler pipe after having released it from the bands.
- Open the band and disconnect the fuel filler pipe from the tank.
 | Collect any fuel that comes out in a suitable container. |
- Undo the bolts (1a) and disconnect the fuel filler pipe assembly (1b).
Refitting
(
Removing
)
- Place the fuel filler pipe assembly in its housing and secure it using the bolts.
- Connect the fuel filler pipe to the tank and secure it using the band.
- Place the plastic protection for the fuel filler pipe in position and secure it using the bands and the nuts.
- Tighten the bolts fixing the fuel filler pipe.
- Place the fuel filler pipe cap in its housing.
- Op. 7055B45 RIGHT HAND REAR SUPPLEMENTARY WHEEL ARCH - R+R
- Op. 4450B08 RIGHT REAR WHEEL R R
- Connect the negative battery terminal (-).
- Remove the vehicle from the lift.