1068A20 ACCELERATOR PEDAL WITH BUILT-IN POTENTIOMETER - R R - Alfa - GT - eLearn

125001071 - 1068A20 ACCELERATOR PEDAL WITH BUILT-IN POTENTIOMETER - R R

) Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	See A1B BATTERY ( CONNECTORS )

1. Disconnect the electrical connection for the accelerator pedal potentiometer.

	Name	Connector
1	Accelerator pedal potentiometer	See K55 ACCELERATOR PEDAL POTENTIOMETER ( CONNECTORS )

2. Undo the bolts (2a) and remove the accelerator pedal with potentiometer incorporated (2b).

Refitting ( Removing

) Refit the accelerator pedal with integrated potentiometer in its seating and secure it with its bolts.Connect the electrical connection to the accelerator pedal potentiometer.Connect the battery terminal (-).

Removing ( Refitting

) Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	See A1B BATTERY ( CONNECTORS )

Op. 7040A37 FUSE BOX COVER - R R Op. 5505A10 IGNITION COIL/S - R+R1. Disconnect the electrical connection for the accelerator pedal potentiometer.

	Name	Connector
1	Accelerator pedal potentiometer	See K55 ACCELERATOR PEDAL POTENTIOMETER ( CONNECTORS )

2. Unscrew the bolts3. Remove the accelerator pedal with the integrated potentiometer.

Refitting ( Removing

) Check that the accelerator pedal and potentiometer assembly is not damaged.Place the accelerator pedal and integrated potentiometer in position and secure it using the bolts.Connect the electrical connection to the accelerator pedal potentiometer. Op. 5505A10 IGNITION COIL/S - R+R Op. 7040A37 FUSE BOX COVER - R RConnect the battery terminal (-).