1072C12 EXHAUST MANIFOLD - R R - Alfa - GT - eLearn

125001082 - 1072C12 EXHAUST MANIFOLD - R R

) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	See A1B BATTERY ( CONNECTORS )

Proceed with the removal Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD ON BULKHEAD - R+R.Proceed with the removal Op. 1080B40 CATALYTIC PRE-CONVERTER - R R.1. Undo the nuts (1a) and remove the exhaust manifold (1b) releasingi t from the studs on the cylinder head.

Refitting ( Removing

) Place the exhaust manifold back in its housing and fix it tightening the nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	EXHAUST MANIFOLD/S	M8	(Cylinder head side) 2.3 ÷ 2.8

Proceed with the refitting Op. 1080B40 CATALYTIC PRE-CONVERTER - R R.Proceed with the refitting Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD ON BULKHEAD - R+R.Connect the battery terminal (-).Remove the car from the ramp.