125001086 - 1072D22 AIR FLOW SWITCH CONTROL ACTUATOR R R

Removing ( Refitting )

• Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 Battery

•     Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R
•     Op. 1008C10 POWER UNIT UPPER REACTION LINK R R
•     Op. 4130B10 POWER STEERING FLUID RESEVOIR R R

1. Disconnect the electrical connection from the switching control actuator enablement solenoid valve.

	Description	Connector
1	Variable geometry solenoid valve	See L15 VARIABLE GEOMETRY CONTROL SOLENOID

2. Disconnect the vacuum intake pipe from the air flow switching device actuator and release it from the fastening on the latter.3. Disconnect the air flow switching device actuator linkage.

• Undo the bolts (1a) and remove the air flow switching device control actuator (1b).

Refitting ( Removing )

• Place the air flow switching device control actuator in position.
• Connect the air flow switching device actuator linkage.
• Connect the vacuum intake pipe from the air flow switching device actuator and secure it to the latter.
• Connect the electrical connection to the switching control actuator enablement solenoid valve.
•     Op. 4130B10 POWER STEERING FLUID RESEVOIR R R
•     Op. 1008C10 POWER UNIT UPPER REACTION LINK R R
•     Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R
• Connect the negative battery terminal (-).