125001129 - 1080B60 ADDITIONAL AIR DELIVERY BY-PASS SOLENOID - R + R

Removing ( Refitting ) Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-)

	Description	Connector
-	Battery	A1B

1. Disconnect the electrical connection for the Lambda sensor.

	Description	Connector
1	Lambda sensor downstream of the post-converter	K17

1. Release the lambda sensor electrical wiring from its fastenings.2. Unscrew and remove the lambda sensor with the electrical wiring. Refitting ( Removing ) Refit the lambda sensor in its seat and tighten to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	-	LAMBDA PROBE	M18	4.1 ÷ 5.0

Secure the lambda sensor electrical wiring to its fastenings.Connect the electrical connection for the Lambda sensor.Connect the negative battery terminal (-).Remove the vehicle from the lift.