125001130 - 1080B94 FRONT LAMBDA PROBE WITH CATALITIC CONVERTER R R

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	See A1B BATTERY ( CONNECTORS )

Proceed with the removal    Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD ON BULKHEAD - R+R.1. Undo and remove the front Lambda sensor for the catalytic converter. Refitting ( Removing ) Place the front Lambda sensor for the catalytic converter back in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	LEFT LAMBDA SENSOR	M18	(Exhaust manifold side) 4.1 ÷ 5.0

Proceed with the refitting    Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD ON BULKHEAD - R+R.Connect the battery terminal (-).Remove the car from the ramp.