125001144 - 1080E63 FUEL VAPOR HOSE BETWEEN RIGID PIPE AND CUT OFF SOLENOID R R

Removing ( Refitting )

  • Position the vehicle on a lift.
  • Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
DescriptionConnector
-Battery See A001 Battery

  • Unscrew the bolts securing the fuel vapour pipe from the intermediate junction to the solenoid, to the air capacity chamber.
  • Release the fuel vapour pipe from the intermediate junction to the solenoid from its fastening.
  • Unscrew the bolts securing the bracket for the solenoid enabling the passage of fuel vapours to the intake.
  • Loosen collar (4a) and remove the fuel vapour pipe from the intermediate junction to the solenoid (4b).
Refitting ( Removing )

  • Refit the fuel vapour pipe from the intermediate junction to the solenoid and secure with a collar.
  • Tighten the bolts securing the solenoid enabling the passage of fuel vapours to the intake.
  • Secure the fuel vapour pipe from the intermediate junction to the solenoid to its fastening.
  • Tighten the bolts securing the fuel vapour pipe from the intermediate junction to the solenoid to the air capacity chamber.
  •     Op. 1072D10 MODULAR INLET MANIFOLD - R+R
  • Op. 1056B60 TUBO COLLETTORE COMBUSTIBILE UNICO, COMPLETO DI ELETTROINIETTORI - S.R.
  •     Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R
  • Connect the negative battery terminal (-).
  • Remove the vehicle from the lift.