1084A10 PIPE FROM SENDER UNIT TO ENGINE OIL PRESSURE W/L - REPLACE - Alfa - GT - eLearn

125001153 - 1084A10 PIPE FROM SENDER UNIT TO ENGINE OIL PRESSURE W/L - REPLACE

1. Using the dipstick, check that the engine oil level is between the MIN and MAX marks on the actual dipstick.

This check should be carried out with the vehicle on a flat surface, several minutes after the engine has been switched off.

2. If necessary, top up the level introducing the recommended oil after having removed the cap.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA 20K	4.4

The table shows the quantity for periodic replacement.

For a distinctly sporty performance, use the recommended oil for the engine lubrication circuit.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA RACING	4.4

The table shows the quantity for periodic replacement.

For the optimum operation of the engine in particularly harsh climatic conditions (temperatures below -15 degrees C), use the recommended oil for the engine lubrication circuit.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA PERFORMER	4.4

The table shows the quantity for periodic replacement.

Never exceed the MAX level.

Fit the cap.Let the engine run for several seconds and wait a few minutes after switching it off.Check the level of the oil once again, then replace the dipstick. 1. Using the dipstick, check that the engine oil level is between the MIN and MAX marks on the actual dipstick.

This check should be carried out with the vehicle on a flat surface, several minutes after the engine has been switched off.

2. If necessary, top up the level introducing the recommended oil after having removed the cap.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA 20K	4.4

The table shows the quantity for periodic replacement.

For a distinctly sporty performance, use the recommended oil for the engine lubrication circuit.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA RACING	4.4

The table shows the quantity for periodic replacement.

For the optimum operation of the engine in particularly harsh climatic conditions (temperatures below -15 degrees C), use the recommended oil for the engine lubrication circuit.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA PERFORMER	4.4

The table shows the quantity for periodic replacement.

Never exceed the MAX level.

Fit the cap.Let the engine run for several seconds and wait a few minutes after switching it off.Check the level of the oil once again, then replace the dipstick.