125001173 - 1088B10 ENGINE COOLING TANK - R + R

Removing ( Refitting )

  • Loosen the coolar and disconnect the coolant return pipe from the engine coolant reservoir.
  • Release the fuel vapour recovery pipes from the fastenings near the engine cooling reservoir.
  • Remove plug and drain the coolant from the reservoir using an appropriate syringe.
  • Undo the bolts securing the engine coolant reservoir.
  • Loosen the collar and disconnect the supply pipe from the engine coolant reservoir.
  • Remove the engine coolant reservoir.
Refitting ( Removing )

  • Place the engine coolant reservoir back in its housing.
  • Connect the coolant return pipe to the engine coolant reservoir and tighten the collar.
  • Undo the bolts securing the engine coolant reservoir.
  • Secure the fuel vapour recovery pipes to the fastenings near the engine cooling reservoir.
  • Connect the coolant return pipe to the engine coolant reservoir to the coolant reservoir and tighten the collar.
  • Top up the engine cooling circuit    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY