125001182 - 1088C42 THERMOSTAT - R + R WITH CYLINDER HEAD REMOVED

1. Disconnect the electrical connection from the engine coolant temperature sensor.

	Description	Connector
1	Engine temperature sending unit	K36

1. Undo the bolts (1a) and remove the thermostat assembly (1b).2. Remove the seal. Refitting ( Removing ) Fit the thermostat, complete pipe and gasket, and secure it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Connect the electrical connection to the engine coolant temperature sensor.