125001227 - 1820B40 HOSE FROM CLUTCH RESERVOIR TO MASTER CYLINDER (PUMP) - R + R
Removing
(
Refitting
)
Proceed with the removal 5530B10 BATTERIA - S.R..Proceed with the removal 5530B52 SUPPORTO/CESTELLO batteria - S.R..1. Move the protective cover away.2. Remove the cap from the bleed valve.3. Connect the recovery device (pipe and reservoir) to the bleed valve on the clutch hydraulic actuator.4. Raise the retaining clip (4a) until the first click is heard and remove pipe (4b) by a sufficient amount to uncover the bleed hole.Leave the hydraulic clutch system to drain completely.
1. Loosen the band and disconnect the flexible pipe from the clutch reservoir to the master cylinder, reservoir side.
1. Loosen the band, disconnect the flexible pipe from the clutch reservoir to the master cylinder, master cylinder side and remove it.
Refitting
(
Removing
)
Place the flexible pipe from the clutch reservoir to the master cylinder back in its housing and tighten the bands.Proceed with the refitting 0010T64 LIQUIDO FRENI e/o FRIZIONE - Verifica livello ed eventuale ripristino.Proceed with the refitting 0010T67 IMPIANTO IDRAULICO FRIZIONE - Spurgo aria.Proceed with the refitting 0010T65 IMPIANTO IDRAULICO FRENI - Spurgo aria.Proceed with the refitting 5530B52 SUPPORTO/CESTELLO batteria - S.R..Proceed with the refitting 5530B10 BATTERIA - S.R..
Removing
(
Refitting
)
Proceed with the removal 5530B10 BATTERIA - S.R..Proceed with the removal 5530B52 SUPPORTO/CESTELLO batteria - S.R..1. Move the protective cover away.2. Remove the cap from the bleed valve.3. Connect the recovery device (pipe and reservoir) to the bleed valve on the clutch hydraulic actuator.4. Raise the retaining clip (4a) until the first click is heard and remove pipe (4b) by a sufficient amount to uncover the bleed hole.Leave the hydraulic clutch system to drain completely.
