125001330 - 3310B57 REAR CALLIPER BRACKET - R R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B11 TYRE INFLATION VALVE CAP - REPLACE1. Undo the nut (1a) of the bolt and move the rear suspension front trailing arm (1b) as much as necessary.2. Undo the nut on the top bolt securing the shock absorber to the hub vertical link.

This operation enables you to access the bottom bolt securing the brake caliper bracket.

3. Undo the bolts (3a) and move the rear brake caliper (3b) away from its bracket.

This operation enables you to access the top bolt securing the brake caliper bracket.

1. Remove the rear brake pads.2. Undo the bolts (2a) and remove the rear brake caliper bracket (2b). Refitting ( Removing ) 1. Refit the rear brake caliper bracket (1a) in its seating and tighten the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	REAR BRAKE CALIPER BRACKET	M10	(Rear wheel hub stub axle side.) 4.5 ÷ 5.5

1. Compress the rear brake caliper piston (1a) using the tool (1b) to facilitate the fitting of the brake caliper.

	Name	Country
1b	Key	1.822.108.000

1. Refit the rear brake caliper (1a), complete with brake pads, in its housing and tighten the bolts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	REAR BRAKE CALIPER	M10	(Bracket side) 5.0

2. Tighten the nut on the top bolt securing the shock absorber to the hub vertical link to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	REAR DAMPER	M12	(Rear wheel hub stub axle side.) 11.1 ÷ 13.5

3. Refit the rear suspension rear trailing arm (3a) in its seating and fix it tightening the nut (3b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
3b	Bolt	REAR SUSPENSION FRONT WISHBONES	M12	(Rear wheel hub stub axle side.) 11.1 ÷ 13.5

Proceed with refitting    Op. 4450B11 TYRE INFLATION VALVE CAP - REPLACE.Remove the car from the ramps.