125001352 - 3330D26 VACUM PIPE FOR BRAKE SERVO ASSEMBLY R R

Removing ( Refitting )
The single-acting valve for the brake servo cannot be dismantled from the vacuum pipe.

  • Disconnect the single-acting valve from the brake servo.

  • Undo the bolts (1a) and remove the bracket (1b) after having released the band from the electrical wiring.
  • Undo the vacuum pipe protection.
  • Disconnect the vacuum pipe from the air capacity chamber and remove complete with brake servo single-acting valve.
Refitting ( Removing )

  • Refit the vacuum pipe complete with the brake servo single-acting valve.
  • Connect the vacuum pipe to the air capacity chamber.
  • Place the protection back in its housing.
  • Refit the bracket and secure with the bolts, then secure the electrical wiring to the band.
  • Connect the single-acting valve to the brake servo.