125001355 - 3330D48 Vacuum SENSOR on brakeservo RR

Removing ( Refitting ) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

1. Disconnect the electrical connection from the vacuum sensor on the brake servo.

	Name	Connector
1	Brake servo vacuum unit sensor	See K105 BRAKE SERVO VACUUM UNIT SENSOR

2. Disconnect the rapid connector for the vacuum pipe from the pressure sensor on the brake servo.3. Undo the bolt (3a) and remove the vacuum sensor on the brake servo (3b). Refitting ( Removing ) Place the vacuum sensor back in its housing on the brake servo and secure it using the bolt.Connect the rapid connector for the vacuum pipe to the pressure sensor on the brake servo.Connect the electrical connection to the vacuum sensor on the brake servo.Connect the negative (-) battery terminal