125001401 - 4110B10 STEERING LINKS - R+R ON VEHICLE - CHECK TOW-IN/TOW-OUT SEPARATELY

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+RMeasure the length of the steering rods to be used for refitting.1. Undo the nut (1a) and disconnect the track rods (1b) from the steering knuckles usiing the tool (1c).

	Name	Country
1c	Extractor	1.821.169.000

1. Loosen the locknuts (1a) and remove the steering rods (1b). Refitting ( Removing ) Place the steering rods back in their housings and tighten them until the length measured at the removal is restored.Tighten the locknuts fixing the steering rods to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	ADJUSTABLE STEERING LINKS	M14	(Power assisted steering box side) 4.5 ÷ 5.5

Connect the steering rods to the front wheel hub steering knuckles and secure them tightening the nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	ADJUSTABLE STEERING LINKS	M10	(Front steering knuckle side) 3.2 ÷ 3.9

Proceed with refitting    Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R.Remove the car from the ramps.