125001429 - 4410A10 L/H OR R/H FRONT SUSPENSION SPRING/DAMPER UNIT (ONE) - R+R - CHECK WHEEL GEOMETRY SEPARATELY IF NECESSARY

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B10 TYRE INFLATION VALVE CAP - REPLACEProceed with removal1. Undo the nuts (1a) and remove the spring/shock absorber assembly for the front suspension (1b).    Op. 4410A80 DAMPER LOWER FORK - R R

The above nuts also secure the front suspension upper wishbone and the bracket to the body for the reaction link.

Refitting ( Removing ) Replace the spring/shock absorber assembly for the front suspension back in its housing and fix it tightening the nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT DAMPER	M12	(Bodyshell side) 4.2 ÷ 5.2

Proceed with refitting    Op. 4410A80 DAMPER LOWER FORK - R R.Proceed with refitting    Op. 4450B10 TYRE INFLATION VALVE CAP - REPLACE.Remove the car from the ramps.It is advisable to check the wheel alignment    Op. 4450A10 FRONT WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT - INCLUDES FRONT WHEEL TOW-IN ADJUSTMENT IF NECESSARY.