4410B68 LOWER SWINGING ARM(ONE), LH OR RH OF FRONT SUSPENSION - R R -CHECK WHEEL ALIGNMENT SEPARATELY - Alfa - GT - eLearn - 4CarData

125001438 - 4410B68 LOWER SWINGING ARM(ONE), LH OR RH OF FRONT SUSPENSION - R R -CHECK WHEEL ALIGNMENT SEPARATELY

Removing ( Refitting

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal Op. 4450B10 TYRE INFLATION VALVE CAP - REPLACEProceed with removalProceed with removal Op. 4410A80 DAMPER LOWER FORK - R R1. Undo the nuts (1a) and remove the upper wishbone (1b). Op. 4410A10 L/H OR R/H FRONT SUSPENSION SPRING/DAMPER UNIT (ONE) - R+R - CHECK WHEEL GEOMETRY SEPARATELY IF NECESSARY

Refitting ( Removing

) Replace the front suspension upper track control arm in it housing and fix it tightening the nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT SUSPENSION TOP LEVER	M10	(Bodyshell side) 4.2 ÷ 5.2

Proceed with refitting Op. 4410A10 L/H OR R/H FRONT SUSPENSION SPRING/DAMPER UNIT (ONE) - R+R - CHECK WHEEL GEOMETRY SEPARATELY IF NECESSARY.Proceed with refitting Op. 4410A80 DAMPER LOWER FORK - R R.Proceed with refitting Op. 4450B10 TYRE INFLATION VALVE CAP - REPLACE.Connect the negative (-) battery terminalRemove the car from the ramps.It is advisable to check the wheel alignment Op. 4450A10 FRONT WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT - INCLUDES FRONT WHEEL TOW-IN ADJUSTMENT IF NECESSARY.