125001487 - 4450C34 BEARING OF ONE FRONT WHEEL HUB, L/H OR R/H - REPLACE WITH PILLAR REMOVED

Removing ( Refitting ) 1. Remove the wheel hub (1a) complete with hub bearing inner race using a hydraulic press and tool (1b).

	Name	Country
1b	Drift	1.870.631.000

Position the steering knuckle in a vice fitted with protective jaws.1. Undo the bolts (1a) and remove the hub bearing flange with bearing inner race and balls. Position the front hub in a vice fitted with protective jaws.1. Prise up and remove the dust cover from the wheel hub.2. Use a suitable extractor (2a) with washer (2b) to remove hub bearing inner race (2c). Refitting ( Removing ) 1. Fit a new hub bearing (1a) in its seat on the front knuckle and tighten bolts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT HUB BEARING/S.	M10	(Front steering knuckle side) 7.6 ÷ 8.4

2. Refit front wheel hub (2a) using a hydraulic perss and tool (2b).

	Name	Country
2b	Fitting tool	1.870.225.002