5505A10 IGNITION COIL/S - R+R - Alfa - GT - eLearn

125001582 - 5505A10 IGNITION COIL/S - R+R

) Op. 7040A37 FUSE BOX COVER - R R1. Disconnect the electrical connections at the front (1a, 1b, 1c, 1d, 1e, 1f).

	Name	Connector
1a	Junction unit under dashboard	See B2A JUNCTION UNIT UNDER DASHBOARD ( FRONT )

	Name	Connector
1b	Junction unit under dashboard	See B2B JUNCTION UNIT UNDER DASHBOARD ( REAR )

	Name	Connector
1c	Junction unit under dashboard	See B2C JUNCTION UNIT UNDER DASHBOARD ( FRONT )

	Name	Connector
1d	Junction unit under dashboard	See B2D JUNCTION UNIT UNDER DASHBOARD ( REAR )

	Name	Connector
1e	Body computer	See M1A BODY COMPUTER ( FRONT )

	Name	Connector
1f	Body computer	See M1E BODY COMPUTER ( REAR )

2. Undo the bolts fixing the control unit.3. Undo the bolts shown fixing the dashboard cover.

1. Move the control unit/body computer assembly slightly and disconnect the electrical connections at the rear (1a, 1b, 1c, 1d, 1e, 1f).

	Name	Connector
1a	Junction unit under dashboard	See B2F JUNCTION UNIT UNDER DASHBOARD ( FACIA )

	Name	Connector
1b	Junction unit under dashboard	See B2G JUNCTION UNIT UNDER DASHBOARD ( FACIA )

	Name	Connector
1c	Junction unit under dashboard	See B2H JUNCTION UNIT UNDER DASHBOARD ( FACIA )

	Name	Connector
1d	Body computer	See M1B BODY COMPUTER ( FACIA )

	Name	Connector
1e	Body computer	See M1C BODY COMPUTER ( FACIA )

	Name	Connector
1f	Body computer	See M1D BODY COMPUTER ( FACIA )

2. Recover the control unit/body computer assembly.

1. Work at the bench and release the retainers (1a) , separate the junction unit (1b) from the body computer.

Refitting ( Removing

) Check that the junction unit is not damaged and, if necessary, check the internal connections.At the bench, connect the junction unit from the body computer and attach the retainers.Connect the rear electrical connections.Position the junction unit.Tighten the bolts.Connect the front electrical connections. Op. 7040A37 FUSE BOX COVER - R RTest the electrical system.