5505A28 CONTAINER OF SUPPLEMENTARY JUNCTION UNIT IN ENGINE BAY - R R - Alfa - GT - eLearn

125001585 - 5505A28 CONTAINER OF SUPPLEMENTARY JUNCTION UNIT IN ENGINE BAY - R R

) Open the bonnet lid.1. Release the retainers (1a) and remove the cover (1b).2. Disconnect the electrical connection.

	Name	Connector
2	Battery earth	See C1 BATTERY EARTH

3. Open the wiring retaining duct.4. Move the earth wiring away from the duct.

1. Release the control unit (1a) from the two side retainers (1b).

1. Lift up the control unit slightly and disconnect the only electrical connection shown.

	Name	Connector
1	Engine compartment junction unit	See B1E ENGINE COMPARTMENT JUNCTION UNIT ( CROSSMEMBER )

1. Move the control unit.2. Undo the nut.3. Remove the seal.4. Release the wiring from the control unit container.5. Remove the control unit container.

Refitting ( Removing

) Check that the additional junction unit container is not damaged.Position the container.Insert the wiring in the control unit container.Fit the seal.Tighten the nut.Connect the electrical connection.Position the control unit and attach it to the side retainers.Position the earth wiring in the duct and closed it.Connect the electrical connection.Close the cover and attach the retainers.Test the electrical system.