125001880 - 7040H10 ROOF PANEL LINING - R R

Work cautiously so as not to dirty or damage the cover.

Removing ( Refitting )     Op. 7040H30 FRONT PILLAR TRIM - R R(right and left)    Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R(right and left)    Op. 7040H80 PARCEL RACK    Op. 7040B10 LOAD PLATFORM (LUGGAGE PLATFORM) TRIM - R+R    Op. 7050A22 REAR SEAT CUSHION - R+R    Op. 7050A14 SPLIT REAR SEAT ASSEMBLY - R+R    Op. 7040H50 REAR PANEL - R R(right and left)    Op. 7040H38 CENTRAL PILLAR UPPER ELEMENT - R R(right and left)    Op. 7040H42 REAR PILLAR TRIM - R R(right and left)    Op. 7065C33 SUN BLIND WITH COURTESY MIRROR AND COURTESY LIGHT ONE LH OR RH R R(right and left)    Op. 5580E22 ANTI-THEFT DEVICE SIREN - R+R    Op. 7040E50 FRONT MODULAR COURTESY LIGHT UNIT - R+R    Op. 7040E16 REAR COURTESY LIGHT - R+R1. Undo the front screws securing the ceiling trim.2. Remove the door seals near the ceiling trim.3. Release the inner Velcro retainers.4. Remove the roof lining and extract it from the passenger compartment through the tailgate housing. Refitting ( Removing ) Check that the cover is undamaged.Insert the ceiling lining into the passenger compartment through the tailgate opening.Position the ceiling trim and engage the inner Velcro retainers.Tighten the front screws securing the ceiling trim.Fit the door compartment seals.    Op. 7040E16 REAR COURTESY LIGHT - R+R    Op. 7040E50 FRONT MODULAR COURTESY LIGHT UNIT - R+R    Op. 5580E22 ANTI-THEFT DEVICE SIREN - R+R    Op. 7065C33 SUN BLIND WITH COURTESY MIRROR AND COURTESY LIGHT ONE LH OR RH R R(right and left)    Op. 7040H42 REAR PILLAR TRIM - R R(right and left)    Op. 7040H38 CENTRAL PILLAR UPPER ELEMENT - R R(right and left)    Op. 7040H50 REAR PANEL - R R(right and left)    Op. 7050A14 SPLIT REAR SEAT ASSEMBLY - R+R    Op. 7050A22 REAR SEAT CUSHION - R+R    Op. 7040B10 LOAD PLATFORM (LUGGAGE PLATFORM) TRIM - R+R    Op. 7040H80 PARCEL RACK    Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R(right and left)    Op. 7040H30 FRONT PILLAR TRIM - R R(right and left)Check that all the parts are fitted correctly and check the operation of removed electrical components.