125001938 - 7050A14 SPLIT REAR SEAT ASSEMBLY - R+R

Removing ( Refitting )     Op. 7050A22 REAR SEAT CUSHION - R+R(right and left)    Op. 7040H80 PARCEL RACK    Op. 7040B10 LOAD PLATFORM (LUGGAGE PLATFORM) TRIM - R+R1. Undo the front bolts fixing the backrest to the floor.

Use a HEXAGONAL SPLINED wrench No. 8 (USAG 234 or equivalent).

2. Undo the bolt fixing the end of the middle rer seat belt. Lower the squab.1. Undo the middle nuts (1a) and bolts (1b) fixing the backrest to the floor.2. Undo the left side nut (2a) and bolt (2b) fixing the backrest to the floor.

Use a HEXAGONAL SPLINED wrench No. 8 (USAG 234 or equivalent).

1. Undo the right side nut (1a) and bolt (1b) fixing the backrest to the floor.2. Remove the squabs. Refitting ( Removing ) Check that the squabs are not damaged.Position the squabs.Tighten the middle and side nuts and bolts fixing the backrests to the floor.

Use the bolts specified by the manufacturer because longer bolts could interfere with the fuel tank.

Tighten the middle and side bolts fixing the backrests to the floor.

	Fastening	Component	Ø	Value(daNm)
-	Nut	REAR SEAT BACKREST JOINTS.	M10 x 1.25	35

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SEAT BACKREST JOINTS.	M10 x 1.25	35

Lift the squab.Tighten the front bolts fixing the backrests to the vehicle floor.

Use the bolts specified by the manufacturer because longer bolts could interfere with the fuel tank.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SEAT BACKREST JOINTS.	M10 x 1.25	35

If necessary, adjust the striker .    Op. 7050A45 STRIKER OF ONE SPLIT REAR SEAT SQUAB FASTENING RELEASE DEVICE ONE LH OR RH R RPosition the end of the middle rear seat belt and fasten it using the bolt.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SEAT BELT END.	-	4

    Op. 7050A22 REAR SEAT CUSHION - R+R(right and left).    Op. 7040B10 LOAD PLATFORM (LUGGAGE PLATFORM) TRIM - R+R.    Op. 7040H80 PARCEL RACK.