7050A36 MOUNT (ONE) FITTING REAR SEAT TO FLOOR - R R - Alfa - GT - eLearn

125001944 - 7050A36 MOUNT (ONE) FITTING REAR SEAT TO FLOOR - R R

) Op. 7050B18 REAR SEAT ARM REST - R+R Op. 7050A43 ONE SPLIT REAR SEAT SQUAB FASTENING RELEASE DEVICE R R Op. 7050B10 L/H OR R/H HEAD RESTRAINT (ONE) OF REAR SEAT - R+R Op. 7050A40 CENTRAL REAR SEAT BELT PANNEL ATTACHMENT R R1. Release the retaining buttons using the special tool.

	Name	Country
1	Scraper blade	1.823.015.000

2. Remove the rear cover.

1. Undo the bolts.2. Remove the squab moutning bracket.3. Prise up the whole cover surround (3a) using the special tool. Use the special tool (3b) to open the channel (3c) and release the cover profile (3d).

	Name	Country
3b	Scraper blade	1.823.014.000

Tilt the squab.1. Remove the Velcro strips using the special tool.

	Name	Country
1	Scraper blade	1.823.015.000

2. Cut the rings anchoring the cover to the padding.3. Remove the trim.

Refitting ( Removing

) Check that the squab cover is intact and shows no signs of damage.Fit the cover in position and using the special tool, clamp the rings anchoring the cover to the padding.

	Name	Country
-	Pliers for metal points	1.878.017.001

Fit the Velcro strips.Tilt the squab.1. Fit the trim surround.2. Beat in the groove using a rubber hammer.

The use of other tools could damage the cover.

Mould the squab cover into shape.3. Fit the squab mounting bracket in position and fix it with the bolts.

Position the top cover and fix it with the retaining buttons. Op. 7050A40 CENTRAL REAR SEAT BELT PANNEL ATTACHMENT R R Op. 7050B10 L/H OR R/H HEAD RESTRAINT (ONE) OF REAR SEAT - R+R Op. 7050A43 ONE SPLIT REAR SEAT SQUAB FASTENING RELEASE DEVICE R R Op. 7050B18 REAR SEAT ARM REST - R+R