125002542 - E8010 DIAGNOSTIC MULTIPLE CONNECTOR - DESCRIPTION

Description

The car is equipped with numerous self-diagnostic electronic control units.When a tester (Examiner or other instrument) is connected to the control units, self-diagnostic data can be read (parameters, errors) or active testing can be carried out.All tester lines are connected to the EOBD (European On Board Diagnosis) connector in line with EC directive 98/69 - ISO standard J1962, centralised on the Body Computer - connector G.Nodes conected to the network are connected via the B-CAN while the vehicle dynamic control network is tested via special K lines.

The following are controlled via the B-CAN network:

  • underfacia control unit;
  • instrument panel;
  • door control unit;
  • radio or integrated radio-phone-navigation system device;
  • climate control system ECU.
For more details    See E1050 CAN CONNECTION LINES

The following are controlled via tester line K:

  • engine management control unit;
  • ABS control unit;
  • Airbag control unit;
  • SELESPEED control unit (if fitted).
  • the gas discharge headlamp control units (if fitted)