1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R + R - Alfa - GT - eLearn

125002612 - 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R + R

) Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	Vedere A1B BATTERIA ( CABLAGGI )

Proceed with the removal Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Discharge the fuel supply pressure with the tool connected to the special valve located at the side of the fuel manifold pipe.

	Description	Code
-	Rapid attachment connector	1.870.684.000

1. Disconnect the electrical connections from the injectors.

	Description	Connector
1	Injector	Vedere N70 ELETTROINIETTORE

2. Disconnect the electrical connection from the phase transformer solenoid.

	Description	Connector
2	Variable valve timing solenoid	See K98 PHASE TRANSFORMER SOLENOID

3. Disconnect the rapid connector for the front fuel supply pipe, fuel manifold pipe side.4. Release the front fuel supply pipe from the fastening on the air chamber.

1. Undo the bolts (1a) and remove the single fuel manifold pipe (1b) with injectors (1c).

Refitting ( Removing

) Place the single fuel manifold pipe complete with injectors back in its housing taking care to fit the injectors in their seats pressing them down with both hands.Tighten the two single fuel manifold pipe fixing bolts.Fasten the front fuel supply pipe to the fastening on the air chamber.Connect the rapid connector for the front fuel supply pipe, fuel manifold pipe side.Connect the electrical connection to the phase transformer solenoid.Connect the electrical connections to the injectors.Proceed with the refitting Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Connect the negative battery terminal (-).