4130B20 POWER STEERING PUMP R R - Alfa - GT - eLearn

) Position the vehicle on the rampProceed with removal Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+RProceed with removal1. Disconnect the the delivery hose to the power assisted steering box from the power steering pump. Op. 4130B10 POWER STEERING FLUID RESEVOIR R R

Release the timing sensor wiring from the collar on the protection.Undo the bolts and remove the protection.Proceed with removal Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removalProceed with removal Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.Proceed with removal1. Keep the pump shaft secured and undo the bolts (1a) and remove the power steering pump pulley (1b). Op. 7055B54 UNDER-ENGINE GUARD - R R2. Undo the bolts (2a) and remove the power steering pump (2b). Op. 1092G10 SINGLE ENGINE BELT R R

) Place the power assisted steering pump back in its housing and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Place the power assisted steering pump pulley back in its housing and tighten the bolts while keeping the pump shaft secured.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Proceed with refitting Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with refitting Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with refitting Op. 4450B04 RIGHT FRONT WHEEL R R.Place the protection back in its housing and secure it using the bolts.Secure the timing sensor wiring using the collar on the protection.Connect the supply pipe to the power assisted steering box to the power assisted steering pump and tighten the connector to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	PIPE BTWN PUMP + POWER STEERING BOX	M16	(Power assisted steering pump side) 4.5 ÷ 5.5