1008A46 CAM SHAFT LEFT RIGID MOUNT - R R - Alfa - GT - eLearn

125000878 - 1008A46 CAM SHAFT LEFT RIGID MOUNT - R R

) Position the vehicle on a lift.Proceed with the removal Op. 4450B04 RUOTA ANTERIORE DESTRA - S.R.Proceed with the removal Op. 7055B66 PROTEZIONE PARAPOLVERE VANO MOTORE NEL PASSARUOTA ANTERIORE DESTRO - S.R.Position a hydraulic jack beneath the engine.1. Undo the bolts (1a) and (1b), then remove the timing side rigid engine support (1c).

Refitting ( Removing

) 1. Place the timing side rigid engine support (1a) in its housing and secure it to the crankcase tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	RIGID ENGINE MOUNT, TIMING SIDE	M10	(Engine crankcase side) 4.5 - 5.5

2. Tighten the bolt securing the timing side rigid engine support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	RIGID ENGINE MOUNT, TIMING SIDE	M12	(Flexible mounting side) 7.9 - 9.7

Remove the hydraulic jack from beneath the engine.Proceed with the refitting Op. 7055B66 PROTEZIONE PARAPOLVERE VANO MOTORE NEL PASSARUOTA ANTERIORE DESTRO - S.R.Proceed with the refitting Op. 4450B04 RUOTA ANTERIORE DESTRA - S.R.Remove the vehicle from the lift.