125000888 - 1008C30 POWER UNIT LOWER REACTION LINK R R
Removing
(
Refitting
)
Position the vehicle on the ramp.1. Undo the bolt (1a) and the nut (1b) and remove the power unit lower reaction rod (1c).
Refitting
(
Removing
)
1. Place the power unit lower reaction rod (1a) back in its housing and fix it tightening the bolt (1b) and the nut (1c) to the recommended torque.| Fastening | Component | Ø | Value(daNm) | |
|---|---|---|---|---|
| 1b | Bolt | POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD.... | M12 | (Power unit rear rigid mounting side) 6.8 ÷ 8.3 |
| Fastening | Component | Ø | Value(daNm) | |
|---|---|---|---|---|
| 1c | Nut | POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD.... | M12 | (Engine crankcase side) 2.7 ÷ 3.4 |
