125000957 - 1028H58 CONNECTING ROD SMALL END BUSH - REPLACE

1. Remove the bush (1a) from the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as shown in the diagram.
NameCountry
1cTool for Extracting/Fitting1.860.821.001
1. Fit a new bush (1a) in the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as shown in the diagram.
The bush is fitted in the small end so that the lubrication port in it is aligned with the one in the small end.
NameCountry
1cTool for Extracting/Fitting1.860.821.001
Ream the inner diameter of the small end bush so that it corresponds to the recommended values.
MeasurementValue
-Small end bushes inner diameter (reaming) (mm)20.006 ÷ 20.012