| | Results of the tests |
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|
| Turn
the key to the ON position and check that all the lights (side and
no. plate) come on when the side lights are activated.Turn the ignition OFF, activate the parking lights using the
switch in the control panel and check that the lights remain on | End of diagnosis | The side lights doe not
come on with the key in the ON position | Continue as instructed See table I01 SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING |
| The side lights do not remain on with the parking lights | Continue as instructed See table I02 PARKING LIGHTS NOT WORKING |
| The no. plate lights only do not work | Continue to Step 1 |
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect
the Examiner to the diagnostic equipment and check that there are
no faults at the Body Computer Node | Continue to Step 2 | Presence of faults | Continue following the instructions
for the diagnostic equipment |
| 2 | ACTIVE DIAGNOSIS | All OK | Problems met | Operation |
|---|
| Keeping
the diagnostic equipment connected, check number plate light bulb
operation by mean of active diagnosis: | Continue to Step 4 | The no. plate lights do
not come on | Continue to Step 3 |
| 3 | CHECKING ELECTRICAL EQUIPMENT | All OK | Problems met | Operation |
|---|
| Check
the condition of the bulbs.Check the continuity and the insulation of the wiring between
the Body Computer Node and the number plate lights connector | Continue to Step 4 | Blown bulbs | Replace the no. plate light Op. 5540A94 |
| Connections broken | Renew the electrical connections See E2010 SIDE LIGHTS / NO. PLATE LIGHTS |
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Replace the Body Computer Op. 5505A32 |
