2398798 - J40 REARVIEW MIRROR ELECTRICAL ADJUSTMENT DOES NOT WORK

The door mirror does not move when the control is operated

The mirror is adjusted by the joystick on the driver's door panel

		Results of the tests
1	SERVICES RELAY CHECK (POWER CIRCUIT)	All OK	Problems met	Operation
	With the ignition ON, check that the additional rear current socket is working properly. The socket is located under the rear parcel shelf support, on the left hand side.It is possible, for example, to insert the cigar lighter and check that it heats up	Continue to Step 4	The additional rear current socket is also not working	Continue to Step 2
2	SERVICES RELAY POWER SUPPLY CHECK (POWER CIRCUIT)	All OK	Problems met	Operation
	Check that the services discharge replay is correctly supplied by the battery.With the ignition ON, connect to the power supply for the relay from the Body Computer and check that the supply is sent to the relay when the electric windows are activated.Also check that the electrical connections between the Body Computer, the battery and the relay are not faulty See   E3032  DOOR MIRROR ADJUSTMENT Do not disconnect the relay	Continue to Step 3	No power supply from the battery	Restore the correct power supply to the relay. If necessary, replace the faulty components (if a fuse is involved, search for the cause of the problem first).
			Supply enablement not provided by the Body Computer	Replace the Body Computer Op.   5505A32
			Connections faulty	Restore the correct connections. See   E3032  DOOR MIRROR ADJUSTMENT
3	RELAY OUTPUT CHECK	All OK	Problems met	Operation
	With the ignition ON, connect to the relay output and check that the supply is sent to the electric windows circuit when the electric windows are activated.Also check that the connections between the services relay and the Driver's/Passenger Door Node are not faulty See   E3032  DOOR MIRROR ADJUSTMENT	Continue to Step 4	The power supply is not sent to the circuit	Replace the services relay
			Connections faulty	Restore the correct connections. See   E3032  DOOR MIRROR ADJUSTMENT
4	MIRROR MOVEMENT CIRCUIT CHECK	All OK	Problems met	Operation
	The problem is due to the simultaneous presence of problems in the two rear view mirror circuits bearing in mind that the problems could be different for the two mirrors	See table J41	Fault persists	Search for the fault starting from another symptom'

The door mirror does not move when the control is operated

The mirror is adjusted by the joystick on the driver's door panel

		Results of the tests
1	ELECTRICAL CONNECTIONS CHECK	All OK	Problems met	Operation
	Check that both the power supply and earth electrical connections for the electric mirrors movement circuit are correct See   E3032  DOOR MIRROR ADJUSTMENT	Continue to Step 2	Connections faulty	Restore the correct connections.
2	JOYSTICK CHECK	All OK	Problems met	Operation
	Check that the joystick is working properly	Continue to Step 3	Joystick faulty	Replace the door mirrors joystick Op. 7005R40
3	MIRROR MOTORS CHECK	All OK	Problems met	Operation
	Check that the mirror movement motors are working properly	Continue to Step 4	Mirror motors faulty	Replace the rear view mirror motor Op.   7005R36
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'