2398808 - K10 DOORS OPEN CHECK NOT WORKING
The special warning light/symbol in the instrument panel is not displayed when one of the doors is opened. The interior lights do not work properly when one of the doors is opened| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the EXAMINER diagnostic equipment and check the CAN NETWORK INFORMATION:
| Continue to Step 1 | Presence of faults in the CAN network | Continue as instructed by the tester | |
| Impossible to converse with the Body Computer | Continue to Step 7 | |||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect the Examiner to the diagnostic socketCheck that there are no faults in the Body Computer | Continue to Step 2 | There are faults in the Body Computer | Proceed in accordance with the instructions provided by the instrument | |
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Two-zone climate control system | Keeping the Examiner equipment connected to the diagnostic socket, check that there are no faults at the Driver's Door Node | Continue to Step 3 | There are faults in the Driver's Door Node | Proceed in accordance with the instructions provided by the instrument |
| Two-zone climate control system | Keeping the Examiner diagnostic equipment connected to the diagnostic socket check that there are no faults in:
| Continue to Step 3 | There are faults in the Driver's Door Node | Proceed in accordance with the instructions provided by the instrument |
| There are faults in the Luggage Compartment Node | Proceed in accordance with the instructions provided by the instrument | |||
| 3 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Keeping the Examiner diagnostic equipment connected to the diagnostic socket check that there are no faults at the Instrument Panel | Continue to Step 4 | There are faults in the instrument panel | Proceed in accordance with the instructions provided by the instrument | |
| 4 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Keeping the Examiner connected to the diagnostic socket, check the operation of the warning light in active diagnosis | Continue to Step 5 | Warning light not working | Replace instrument panel Op. 5560B11 | |
| 5 | CHECKING ELECTRICAL EQUIPMENT | All OK | Problems met | Operation |
| Two-zone climate control system | Check the connections between the Body Computer, Driver's Door Node, instrument panel and switches in the locks See E3040 CENTRAL LOCKING | Continue to Step 6 | Connections not correct | Restore the correct connections: See E3040 CENTRAL LOCKING |
| Two-zone climate control system | Check the connections between the Body Computer, Driver's/Passenger Door Nodes, Luggage Compartment Node, instrument panel and switches in the locks See E3040 CENTRAL LOCKING | Continue to Step 6 | Connections not correct | Restore the correct connections: See E3040 CENTRAL LOCKING |
| 6 | SWITCH CHECK | All OK | Problems met | Operation |
| Check the operation of the switches in the locks | Continue to Step 7 | Front door lock switch defective | Replace the lock Op. 7005N21 | |
| Rear door lock switch defective | Replace the lock Op. 7010N21 | |||
| Luggage compartment lock with faulty switch | Replace the lock Op. 7015B10 | |||
| 7 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present with any of the doors open | End of diagnosis | The fault persists | Replace the Body Computer Op. 5505A32 | |