2398815 - K20 FUEL LEVEL GAUGE NOT WORKING

With the ignition key in the ON position, the fuel gauge indicator is not working properly (it indicates a different level from what is actually in the tank)

the fuel level message is supplied by the 'body computer node' and is made available to the 'instrument panel node' via the B-CAN.

the 'body computer node' also sends the fuel level sensor error message.

		Results of the tests
1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the Examiner to the diagnostic socketCheck that there are no faults in the Body Computer	Continue to Step 2	Sensor with broken circuit, sensor short circuited, value inconsistent/implausible in relation to actual fuel level.	Continue according to the instructions for the diagnostic equipment
2	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the Examiner connected to the diagnostic socket, check the operation of the pointer in active diagnosis	Continue to Step 3	The pointer does not move	Replace instrument panel Op. 5560B11
3	FUEL LEVEL SENSOR CHECK	All OK	Problems met	Operation
	Check the operation of the fuel level sensor.	Continue to Step 4	Sensor not working	Replace the fuel pump assembly Op.   1040A70
4	ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check the continuity of the cable between the fuel level sensor, the Body Computer and the instrument panel See   E4010  INSTRUMENT PANEL	Continue to Step 5	Cables broken/not insulated	Restore cable continuity/insulation: See   E4010  INSTRUMENT PANEL
5	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists	Replace the Body Computer Op.   5505A32