2398821 - K30 MINIMUM ENGINE OIL PRESSURE WARNING LIGHT NOT WORKING
.| Results of the tests | ||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the diagnostic equipment Examiner or Examiner Plus to the diagnostic socket and check:
| Continue to Step 2 | For faults on the instrument panel; For faults on the i.e. control unit. | Continue as instructed by the tester | |
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Keeping the Examiner or Examiner Plus diagnostic equipment connected to the diagnostic socket, check the operation of the warning light via active diagnosis. | Continue to Step 3 | Warning light not working | Panel defective: replace the instrument panel Op. 5560B11 | |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| 1.2 16v 1.4 16v | Check that the fault is no longer present | End of diagnosis | Fault persists | Replace I.E. control unit Op. 1056B82 |
| 1.3 JTD 16v 1.9 JTD 8v | Check that the fault is no longer present | End of diagnosis | Fault persists | Replace I.E. control unit Op. 1060G80 |