2398881 - L20 PASSENGER SIDE TEMPERATURE ADJUSTMENT DOES NOT WORK

When the required temperature is set on the passenger side, no air flow is felt at the required temperature

		Results of the tests
1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the Examiner, check for errors on the passenger side air mixing motor	Continue to Step 2	Air mixer motor error	Continue to Step 3
2	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keep the Examiner connected and check air recirculation motor operation by means of active diagnosis	Continue to Step 7	Air mixing motor does not work	Continue to Step 3
3	ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check continuity/insulation of the electrical connection between climate control Node and passenger side air mixing motor See   E6020  AIR CONDITIONING	Continue to Step 4	Electrical conection broken or not insulated.	Restore continuity/insulation of electrical connection See   E6020  AIR CONDITIONING
4	CHECKING AIR MIXING MOTOR OPERATION	All OK	Problems met	Operation
	Check for a control signal from the climate control node. See   E6020  AIR CONDITIONING	Continue to Step 5	No signal	Continue to Step 7
5	CHECK AIR MIXER MOTOR FLAP	All OK	Problems met	Operation
	Check that the air mixing motor flap moves through its travel without sticking.	Continue to Step 6	Flap blocked or damaged	Release the air recirculation motor flap from its block or replace the flap if damaged.
6	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present.	End of diagnosis	Fault persists	Change the passenger side air mixer motor. Op.   5040D86
7	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Change the climate control system node