2400044 - 0510C10 fuel system - check delivery pressure

Disconnect the electrical connections from the injectors.

NameConnector
-Injector  N70 
1. Set up the test equipment as described in points 2, 3 and 4 below.

NameCountry
1Pressure gauge1.860.955.000
The test equipment has adapators for connection to various types of injection systems; before making the connections, fit the appropriate adpators to the equipment.
2. Open the cock.3. Close the cock.4. Close the cock.5. Position the test equipment and connect it to the fuel manifold's bleed valve by means of the specific connector.

NameCountry
5Rapid connector1.870.684.000
Reconnect the electrical connections to the fuel injectors.Start the engine and check that the pressure gauge's reading is within the specified limits.

MeasurementValue
-Check delivery pressure (bar)3.5
Switch off the engine.Operate the fuel pump by means of the 'Active Diagnosis' of the diagnostic equipment and check that the pressure does not exceed 4 bar.Disconnect the test equipment and specific connector from the fuel manifold bleed valve.

NameCountry
-Rapid connector1.870.684.000

NameCountry
-Pressure gauge1.860.955.000