2400056 - 1008A46 cam shaft left rigid mount - r r
Removing
(
Refitting
)
Proceed with removal
- 1008B10 power unit front mount
(timing side) flexible block - replace1. Undo the bolts (1a) and remove the gearbox side rigid power unit
support (1b).
Refitting
(
Removing
)
1. Refit the timing side power unit rigid support (1a) in its seating
and tighten the bolts (1b) to the specified torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Bolt | ENGINE MOUNT TIMING SIDE | M8 | (Engine crankcase side) 2.0 ÷ 2.4 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Bolt | ENGINE MOUNT TIMING SIDE | M10 | (Engine crankcase side) 5.4 ÷ 6.6 |
