2400058 - 1008B10 power unit front mount (timing side) flexible block - replace
Removing
(
Refitting
)
Position a hydraulic jack under the crankcase
sump. 1. Undo nuts (1a) and (1b), then remove the timing side power unit
support flexible mounting (1c).
Refitting
(
Removing
)
1. Place the timing side power unit support flexible mounting (1a)
in position and secure it tightening the nuts (1b) and (1c) to the
recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Nut | FRONT RUBBER MOUNTS | M10 | (Rigid support side) 4.5 ÷ 5.5 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1c | Nut | FRONT RUBBER MOUNTS | M10 | (Bodyshell side) 4.1 ÷ 5.0 |
