2400115 - 1040A74 inertia switch for electric pump supply circuit r + r

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Move the upper section of the floor covering near the passenger side dashboard aside.2. Disconnect the electrical connection from the inertia switch.

	Name	Connector
2	Inertial switch	I50

3. Undo retaining nuts (3a) and remove inertia switch (3b) Refitting ( Removing ) Place the inertia switch back in its housing.Connect the electrical connection to the inertia switch.Tighten the inertia switch fixing nuts.Put the floor trim back in its place.Connect the negative (-) battery terminal.