2400155 - 1080B94 front lambda probe with catalitic converter r r

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal  - 1048A10  air cleaner filtering element - replace1. Disconnect the electrical connection for the front Lambda sensor for the catalytic converter.

	Name	Connector
1	Lambda sensor on catalyzer	K17

2. Use a suitable commercial wrench to undo and remove the front Lambda sensor for the catalytic converter. Refitting ( Removing ) Place the front Lambda sensor for the catalytic converter back in its housing and tighten it to the recommended torque using a suitable commercial wrench.

	Fastening	Component	Ø	Value(daNm)
-	-	CONVERTER FRONT LAMDBA SENSOR	M18	4.1 ÷ 5.0

Connect the electrical connection for the front Lambda sensor for the catalytic converter. Proceed with removal  - 1048A10  air cleaner filtering element - replace . Connect the negative (-) battery terminal.