1088E10 RADIATOR COOLING FAN - R + R - Fiat - IDEA - eLearn

2400183 - 1088E10 radiator cooling fan - r + r

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 1048A10 air cleaner filtering element - replace Proceed with removal - 7210E10 R.R. FRONT BUMPER1. Disconnect the electrical connections from the engine cooling fan resistor.

	Name	Connector
1	Engine fan adjustment resistor	O10

2. Disconnect the electrical connection for the radiator cooling fan and move the electrical wiring to the side.

	Name	Connector
2	Engine electric fan motor	N11

1. Undo the bolt fixing the radiator cooling fan to the bodyshell.

1. Undo the bolts fixing the radiator cooling fan. Release the air conditioning condenser pins from the radiator cooling fan.2. Remove the radiator cooling fan.

Refitting ( Removing

) Place the radiator cooling fan back in its housing and position the air conditioning condenser pins on the actual fan.Tighten the bolts fixing the radiator cooling fan.Tighten the bolt fixing the radiator cooling fan to the bodyshell.Connect the electrical connection to the radiator cooling fan.Connect the electrical connections to the resistor for the engine cooling fan. Proceed with refitting - 7210E10 R.R. FRONT BUMPER . Proceed with refitting - 1048A10 air cleaner filtering element - replace . Connect the negative (-) battery terminal.Remove the car from the ramps.