2400305 - 2110D74 differential l/h inner drive shaft - r + r

Removing ( Refitting ) Position the vehicle on the ramp Proceed with removal  - 4450B02  left front wheel r r1. Undo the nut (1a) and disconnect the steering rod (1b) from the left steering knuckle using the tool (1c).

NameCountry
1cExtractor1.871.000.700
2. Undo the bolts fixing the left front hub steering knuckle to the front shock absorber.
1. Loosen the band (1a) and disconnect the left driveshaft (1b).
1. Undo the plug and drain the manual gearbox and differential.
Collect the manual gearbox and differential oil in a suitable container.
1. Remove the left differential internal driveshaft using a special lever.
Take care not to damage the oil seal seat during the removal of the driveshaft.
Refitting ( Removing ) Place the left differential internal driveshaft back in its housing.Connect the left driveshaft and tighten the band.1. Tighten the bolts fixing the left front hub steering knuckle to the front shock absorber to the recommended torque.

FasteningComponentØValue(daNm)
1BoltFRONT HUB STEERING KNUCKLE.M10(Shock absorber side) 6.2 ÷ 6.8
2. Connect the steering rod (2a) to the left front steering knuckle and tighten the nut (2b) to the recommended torque.

FasteningComponentØValue(daNm)
2bNutADJUSTABLE STEERING LINKSM10(Steering knuckle side) 3.6 ÷ 4.4
1. Tighten the manual gearbox and differential fluid drain plug to the recommended torque.

FasteningComponentØValue(daNm)
1Drain plugGEAR CASING PADSM16(Differential side) 1.6 ÷ 2.0
Proceed with refitting  - 4450B02  left front wheel r r . Refill the manual gearbox and differential  - 0010T41  MANUAL GEARBOX OIL - Check level and top up, if necessary . Remove the car from the ramps.