2400306 - 2110D76 Differential right INNER DRIVESHAFT - R.R.

Removing ( Refitting ) Position the vehicle on the ramp Proceed with removal  - 4450B04  right front wheel r r1. Undo the nut (1a) and disconnect the steering rod (1b) from the right front hub steering knuckle using the tool (1c).

NameCountry
1cExtractor1.871.000.700
2. Undo the bolts fixing the right front hub steering knuckle to the front shock absorber.
1. Loosen the band (1a) and disconnect the right driveshaft (1b).
1. Undo the plug and drain the manual gearbox and differential.
Collect the manual gearbox and differential oil in a suitable container.
1. Remove the right differential internal driveshaft using a special lever.
Take care not to damage the oil seal seat during the removal of the driveshaft.
Refitting ( Removing ) Place the right differential internal driveshaft in its housing.Connect the right driveshaft and tighten the band.1. Tighten the bolts fixing the right front hub steering knuckle to the front shock absorber to the recommended torque.

FasteningComponentØValue(daNm)
1BoltFRONT HUB STEERING KNUCKLE.M10(Shock absorber side) 6.2 ÷ 6.8
2. Connect the steering rod (2a) to the right front steering knuckle and tighten the nut (2b) to the recommended torque.

FasteningComponentØValue(daNm)
2bNutADJUSTABLE STEERING LINKSM10(Steering knuckle side) 3.6 ÷ 4.4
Proceed with refitting  - 4450B04  right front wheel r r . 1. Tighten the manual gearbox and differential fluid drain plug to the recommended torque.

FasteningComponentØValue(daNm)
1Drain plugGEAR CASING PADSM16(Differential side) 1.6 ÷ 2.0
Refill the manual gearbox and differential  - 0010T41  MANUAL GEARBOX OIL - Check level and top up, if necessary . Remove the car from the ramps.